Abitibi Canyon GS
34' High Abitibi was the first dam machined by OLM. This is where OLM started to develop the technique that would prove to work on a timely matter on so many dams to follow.
Calabogie GS
OLM is ready to start year 2 at Calabogie. Machining the embedded parts of the roll paths and seal paths on the sluice gates.
Barrett Chute GS
OLM completed 4 head gates roll paths a height of 40'. OLM is currently starting on the sluice gates
Arnprior GS
OLM machined the embedded parts the roll paths of 2 head gates at Arnprior GS.
Chats Falls GS
With the height of 36' OLM machined 4 sluice gate roll paths and seals.
Des Joachims GS
OLM machined 6 sluice gates which included roll paths, seal paths and sills. 36' in height.
Otto Holden GS
OLM machined 6 sluice gates at Otto Holden. Which included the milling of roll paths 34' high and seal paths. Also OLM helped with conduct the customer's survey.
Chenaux GS
Chenaux GS is owned by OPG. OLM was able to maintain the tight schedule set out by their customer and machined the embedded parts on 6 Sluice gates with a height of 34′ , the work included roll paths, seal paths, and sills. Also OLM completed 24 head gates at Chenaux GS which included roll paths, seal paths, sills and lintels. The head gates were 30′ high.
Lower Notch GS
QUEBEC PROJECTS
La Tuque GS
OLM machined the embedded parts of the roll paths and gate's edge. The roll path were 31.5' high.
Beauhnarois GS
Weather brought a challenge on Beauharnois, these gates were machined during the winter/spring season. OLM machined the embedded parts of the roll paths, seal paths, lintels and sill on two gates at Beauharnois.
NEW BRUNSWICK PROJECTS
NEWFOUNDLAND AND LABRADOR PROJECTS
Lobstick
Lobstick is owned by Nalcor. This dam height pushed OLM to develop a machine and a technique to machine the roll paths that were 76' High. OLM had to also fight against the high wind and weather that mother nature provided.
Gabbro GS
OLM will be helping conduct a survey at Gabbro .
Whitefish GS
Height of 64' OLM machined the roll paths on 3 head gates at Whitefish.
Churchill Falls GS
OLM machined the embedded parts of two head gate roll paths at the height of 56' at the Churchill Falls GS.